Description

One instrument for all electrical safety tests and Power Quality analysis

T60 3 Phase Power Quality Analyser has a colour display and was designed with the aim of making safety of electrical installations visible and valuable, easily and quickly.

Thanks to the new HTOS™ system the unit displays a message OK – NOT OK after completing the test.

The user interface, totally updated under HTOS™, permits to set and carry out measurements in few steps.

You can store all recorded data and create folders and sub-folders for each kind of test adding comments and notes by means of virtual keyboard.

T60 is also a three-phase power and energy consumption analyzer boasting, as unique feature, its FREE APP HTAnalysis compatible with iOS and Android.

Test results can be transferred through Wi-Fi onto smartphone or tablet enclosing a picture, a video or a voice note to each measurement. You can transfer everything onto HT Cloud and make data available in real time for your colleagues all over the world.

T60 makes the job of installer, electrician or consultant easy, rapid and cost-effective.

Features

Touchscreen colour display
Integrated WiFi connection and compatibility with HTANALYSIS App
Continuity of protective circuit with 200mA
Insulation with voltage 50, 100, 250, 500, 1000VDC
Time/Current tripping of A, AC General, Selective and Delayed RCDs up to 1000mA
Time/Current tripping of type B RCDs up to 300mA
Tripping time and current of RCDs with separate clamp jaws type B, A, AC Standard, Selective and Delayed up to 10A
Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current
Line/Loop impedance with high resolution (with optional accessory IMP57)
Percentage voltage drop on the line
Measurement and recording of leakage currents and environment parameters
Three-phase Power quality and Energy consumption analysis
9 types of electrical systems
- 1Φ-2wires
- 1Φ-split phase
- 3Φ-3 wires, 3Φ-Aron
- 3Φ-Open Δ
- 3Φ-Open Y
- 3Φ-2 el. 1/2
- 3Φ-4 wires Y
- 3Φ-High Leg.
632 parameters can be recorded for over two months
Voltage Anomalies (dips and peaks) with a resolution of 20ms @50Hz
Measurement/recording of Active, Reactive, Apparent Power
Measurement/recording of Active, Reactive, Apparent Energy
Measurement/Recording of Voltage and Current Harmonics up to 49th with THD%
Recording autonomy higher than one month with 64 quantities and IP =15 minutes
Voltage/current vector diagram
Voltage/current waveforms
Tables or histograms of Harmonics and THD%
Summary table of main electric parameters
Help on line on the display
Protection category – CAT IV

Technical Overview

*ELECTRICAL SPECIFICATIONS – SAFETY SECTION ()** Accuracy is indicated as ± (% readings no. of digits * resolution) at 23°C ± 5°C, <80%HR
Voltage (RCD, LOOP, Phase sequence)
Range (V)	Resolution (V)	Accuracy
15 – 460	1	±(3.0% rdg 2dgt)
Frequency
Range (Hz)	Resolution (Hz)	Accuracy
47.0 – 63.6	0.1	±(0.1% rdg 1dgt)
Continuity test on protective and equalizing conductors
Range (W)	Resolution (W)	*Accuracy ()**
0.01 – 19.99 20.0 – 99.9	0.01 0.1	±(5.0%rdg 3dgt)
(*) calibrate the cables to null their resistance
Test current Open-circuit voltage: Safety protection:	> 200mA DC for R ≤ 5Ω (calibration included) ; Resolution for DC current :1mA 4V ≤ Vo ≤ 12V The display shows an error message for input voltage > approx. 10V
Insulation resistance (DC voltage)
Test voltage (V)	Range (MW)	Resolution (MW)	Accuracy
50	0.01 – 9.99 10.0 – 49.9 50.0 – 99.9	0.01 0.1 0.1	±(2.0%rdg 2dgt) . ±(5.0%rdg 2dgt
100	0.01 – 9.99 10.0 – 99.9 100.0 – 199.9	0.01 0.1 0.1	±(2.0%rdg 2dgt) . ±(5.0%rdg 2dgt)
250	0.01 – 9.99 10.0 – 99.9 100 – 499	0.01 0.1 1	±(2.0%rdg 2dgt) . ±(5.0%rdg 2dgt
500	0.01 – 9.99 10.0 – 199.9 200 – 499 500 – 999	0.01 0.1 1 1	±(2.0%rdg 2dgt) . . ±(5.0%rdg 2dgt)
1000	0.01 – 9.99 10.0 – 199.9 200 – 999 1000 – 1999	0.01 0.1 1 1	±(2.0%rdg 2dgt) . . ±(5.0%rdg 2dgt)
Open-circuit voltage: Short circuit current: Nominal test current: Safety protection:	nominal test voltage –0% 10% <6.0mA at 500V test voltage >1mA if load= 1kW * Vnom (Vnom = 50V, 100V, 250V, 500V, 1000V) the display shows an error message for input voltage > approx.10V
Z Line (Line-Line, Line-Neutral, Line-PE)
Range [W]	Resolution [W]	Accuracy
0.00 ¸ 199.9 mW () 200 ¸ 1999 mW ()	0.1 mW () 1 mW ()	±(5.0% rdg 1mW) (*)
0.01 ¸ 9.99 W 10.0 ¸ 199.9 W	0.01 W 0.1 W	±(5.0% rdg 3dgt)
() By means of IMP57 optional accessory*
Maximum test current: Test voltage ranges: Protection type: Insulation materials:	5.81A (at 265V); 10.10A (at 457V) 100¸265V (Line-Neutral) / 173¸460V (Line-Line); 50/60Hz ± 5% MCB (B, C, D, K), Fuse (gG, aM) PVC, Rubber butyl, EPR, XLPE
First fault current (IT systems)
Range (mA)	Resolution (mA)	Accuracy
0.1 – 0.9 1 – 999	0.1 1	±(5.0% rdg 1dgt) ±(5.0% rdg 3dgt)
Limit contact voltage (ULIM) :	25V, 50V
RCD test (Molded case type)
RCD type: Rated tripping currents (IΔN): Line-PE, Line-N voltage: Frequency:	AC, A, B – General (G), Selective (S) and Delayed (D) 10mA, 30mA, 100mA, 300mA, 500mA, 650mA, 1000mA 100V -265V RCD type AC and A, 190V -265V RCD type B 50/60Hz ± 5%
RCD tripping current (Molded case type – RCD General)
RCD type	IΔN	Range IΔN (mA)	Resolution (mA)	Accuracy IΔN
AC, A	IΔN = 10mA	(0.3 – 1.1) IΔN	≤ 0.1 IΔN	– 0%, 10%IΔN
AC, A	10mA <IΔN ≤650mA			– 0%, 5%IΔN
B	30mA ≤IΔN ≤100mA			– 0%, 5%IΔN

RCD Molded type tripping time range [ms] (TT/TN system)

x 1/2

x 1

x 2

x 5

AUTO

Ramp

10mA

999

200

250

150

√

310

30mA – 100mA

999

200

250

150

√

310

300mA

999

200

250

150

√

310

500mA – 650mA

999

200

250

150

√

310

1000mA

999

200

250

Resolution: 1ms, Accuracy: ±(2.0%rdg 2dgt)

RCD Molded type tripping time range [ms] (IT system)
	x 1/2				x 1			x 2			x 5			AUTO			Ramp
		G	S	D	G	S	D	G	S	D	G	S	D	G	S	D	G	S	D
10mA	AC A B	999 . .	999 . .	999 . .	999 . .	999 . .	999 . .	200 . .	250 . .		50 . .	150 . .		√ . .	√ . .		310 . .
30mA 100mA 300mA	AC A B	999 . .	999 . .	999 . .	999 . .	999 . .	999 . .	200 . .	250 . .		50 . .	150 . .		√ . .	√ . .		310 . .
500mA 650mA	AC A B	999 . .	999 . .	999 . .	999 . .	999 . .	999 . .	200 . .	250 . .		50 . .	150 . .		√ . .	√ . .		310 . .
1000mA	AC A B	999 . .	999 . .	999 . .	999 . .	999 . .	999 . .	200 . .	250 . .
Resolution: 1ms, Accuracy: ±(2.0%rdg 2dgt)

Test on earth leakage delay tester RCDs (with RCDX10 optional accessory)
RCD type: Rated tripping currents (IΔN): Line-PE, Line-N voltage: Frequency:	AC, A, B – General (G), Selective (S) and Delayed (D) 0.3A ¸ 10A 100V -265V RCD type AC and A, 190V -265V RCD type B 50/60Hz ± 5%
Earth leakage delay tester RCDs tripping current (RCD General)
RCD type	IΔN	Range IΔN [mA]	Resolution [mA]	Accuracy IΔN
AC, A	300mA ≤IΔN ≤6.5A	(0.3¸ 1.1) IΔN	≤ 0.1IΔN	– 0%, 5%IΔN
B	300mA ≤IΔN ≤1A

Earth leakage delay tester RCDs trip out time range [ms] (TT/TN system)
	x 1/2				x 1			x 2			x 5			AUTO			Ramp
		G	S	D	G	S	D	G	S	D	G	S	D	G	S	D	G	S	D
0.3A – 1.0A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A	999	999	999	999	999	999	200	250		50	150		√	√		310
	B	999	999	999	999	999	999										310
1.1A – 3.0A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A	999	999	999	999	999	999	200	250		50	150		√	√		310
	B	999	999	999	999	999	999
3.1A –6.5A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A	999	999	999	999	999	999	200	250		50	150		√	√		310
	B	999	999	999	999	999	999
6.6A – 10.0A	AC	999	999	999	999	999	999	200	250
	A	999	999	999	999	999	999
	B
Resolution: 1ms, Accuracy: ±(2.0%rdg 2dgt)

Earth leakage delay tester RCDs trip out time range [ms] (IT system)
	x 1/2				x 1			x 2			x 5			AUTO			Ramp
		G	S	D	G	S	D	G	S	D	G	S	D	G	S	D	G	S	D
0.3A – 1.0A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A
	B
1.1A – 3.0A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A
	B
3.1A –6.5A	AC	999	999	999	999	999	999	200	250		50	150		√	√		310
	A
	B
6.6A – 10.0A	AC	999	999	999	999	999	999	200	250
	A
	B
Resolution: 1ms, Accuracy: ±(2.0%rdg 2dgt)

RA – Non-trip earth loop impedance
Test voltage:	100-265V (Line-PE), 50/60Hz ± 5%
RA – Systems with Neutral wire
Range [Ω]	Resolution [Ω]	Accuracy
0.01 – 9.99	0.01	-0%, (5.0% rdg 0.1Ω)
10.0 -199.9	0.1	-0%, (5.0% rdg 1Ω)
200 -1999	1	-0%, (5.0% rdg 3Ω)
Test current:	~10mA
RA – Systems without Neutral wire
Range [Ω]	Resolution [Ω]	Accuracy
1 – 1999	1	-0%, (5.0% rdg 3dgt)
Test current: < ½ IΔN set
Contact voltage (RCD and Ra test)
1 – 1999	1	-0%, (5.0% rdg 3dgt)
Contact voltage (EARTH test – TT system)
Range [V]	Resolution [V]	Accuracy
0 – 99.9	0.1	-0%, (5.0% rdg 3V)
Contact voltage (EARTH test – TN system)
Range [V]	Resolution [V]	Accuracy
0 – 99.9	0.1	-0%, (5.0% rdg 3V)
100 – 999	1	-0%, (5.0% rdg 3V)
Ground resistance with 3-wire method
Range [Ω]	Resolution [Ω]	Accuracy
0.01 – 9.99	0.01	±(5.0% rdg 3dgt)
10.0 – 99.9	0.1
100 – 999	1
1.00k – 49.99k	0.01k
Test current: <10mA – 77.5Hz, Open-circuit voltage: < 20Vrms (*) Add 5% to the accuracy if the probe resistances (Rs or Rh) > 100 x Rmeas
Soil resistivity with 4-wire Wenner method
Range [Ωm]	Resolution [Ωm]	*Accuracy ()**
0.06 – 9.99	0.01	±(5.0% rdg 3dgt)
10.0 – 99.9	0.1
100 – 999	1
1.00k – 9.99k	0.01k
10.0k – 99.9k	0.1k
100k – 999k (*)	1k
1.00M – 3.14M (*)	0.01M
() with distance d=10m, Distance “d” range: 1 -10m*
Test current: <10mA – 77.5Hz, Open-circuit voltage: < 20Vrms
Phase sequence rotation with 1-wire method
Voltage range P-N, P-PE[V]	Frequency range
100 – 265	50Hz/60Hz ± 5%
Measurement is only carried out by direct contact with metal live parts (not on insulation sheath)
Voltage drop on main power lines (ΔV%)
Range (%)	Resolution (%)	Accuracy
0 – 100	0.1	±(10.0% rdg 4dgt)
Voltage range Phase-PE, Phase-Neutral: 100 -265V, Frequency: 50/60Hz ± 5%
Leakage current (by HT96U optional clamp transducer)
FS clamp AC (A)	Resolution	Accuracy
1	0.1mA	±(1.0% rdg 20dgt)
10 ≤ FS <300	0.1A
1 < FS <10	0.01A
300 ≤ FS <3000	1A
Environmental parameters (AUX function)
Parameter	Range	Resolution	Accuracy
Temperature [°C]	-20°C – 80°C	0.1 °C	±(2.0%rdg 2dgt)
Temperature [°F]	-4°F – 176°F	0.1 °F
Relative humidity [%HR]	0 – 100%HR	0.1% UR
DC output voltage	0.1mV – 1.0V	0.1mV
Illuminance [Lux]	0.001Lux – 20.00 Lux (*)	0.001 – 0.02 Lux
	0.1 Lux – 2000 Lux (*)	0.1 – 2 Lux
	1 Lux – 20 kLux (*)	1 – 20 Lux
(*) Accuracy of HT53 lux probe is according to Class AA

ELECTRICAL SPECIFICATIONS – PQA SECTION
AC TRMS Voltage (Phase-Neutral)
Range [V]	Resolution [V]	Accuracy
15.0—380.0	0.1V	±(1.0% rdg 1dgt)
Allowed crest factor: ≤ 1,5 ; Frequency: 42 ¸ 69.0 Hz
AC TRMS Voltage (Phase-Phase)
Range [V]	Resolution [V]	Accuracy
15.0 – 660.0	0.1V	±(1.0% rdg 1dgt)
Allowed crest factor: ≤ 1,5 ; Frequency: 42 ¸ 69.0 Hz
Frequency
Range [Hz]	Resolution [Hz]	Accuracy
DC, 42 – 69.0	0.01	±(2.0% rdg 2dgt)
Allowed voltage: 15.0¸ 660V; Allowed current: 5%FS clamp ¸ FS clamp
DC/ AC TRMS Current (STD clamp)
FS clamp	Range [A]	Resolution [A]	Accuracy
≤ 10A	5% FS – 9.99	0.01	±(1.0% rdg 3 dgt)
10A ≤ FS ≤ 300	5% FS – 299.9	0.1
300A ≤ FS ≤ 3000	5% FS – 2999	1
Range: 5 – 999.9 mV; Values under 5mV are zeroed Allowed crest factor: ≤ 3; Frequency: 42 – 69.0 Hz
AC TRMS Current (FLEX clamp – 300A AC)
Range [mV]	Frequency [Hz]	Resolution	Accuracy	Overload protection
0.085 – 85.0	42 – 69.0	8.5µV	±(0.5% rdg 0.17% FS)	10V
Allowed crest factor ≤ 3, Values under 1A are zeroed
AC TRMS Current (FLEX clamp – 3000A AC)
Range [mV]	Frequency [Hz]	Resolution	Accuracy	Overload protection
0.425 – 255.0	42 – 69.0	85µV	±(0.5% rdg 0.17% FS)	10V
Allowed crest factor ≤ 3, Values under 5A are zeroed
DC Power
FS clamp	Range [kW]	Resolution [kW]	Accuracy
≤ 10A	0.000 – 9.999	0.001	≤(2.0% rdg 7dgt)
≤ 10A	10.00 – 99.99	0.01
10A ≤ FS ≤ 200	0.00 – 99.99	0.01
10A ≤ FS ≤ 200	100.0 – 999.9	0.1
200A ≤ FS ≤ 1000	0.0 – 999.9	0.1
200A ≤ FS ≤ 1000	1000 – 9999	1
1000A ≤ FS ≤3000	0 – 9999	1
Active power (@ 230V, I > 5%FS, cosφ ≥ 0.5, f=50.0Hz)
FS clamp	Range [kW]	Resolution [kW]	Accuracy
≤ 10A	0.000 – 9.999	0.001	≤(2.0% rdg 7dgt)
≤ 10A	10.00 – 99.99	0.01
10A ≤ FS ≤ 200	0.00 – 99.99	0.01
10A ≤ FS ≤ 200	100.0 – 999.9	0.1
200A ≤ FS ≤ 1000	0.0 – 999.9	0.1
200A ≤ FS ≤ 1000	1000 – 9999	1
1000A ≤ FS ≤3000	0 – 9999	1
Reactive power (@ 230V, I > 5%FS, cosφ < 0.9, f=50.0Hz)
FS clamp	Range [kVAr]	Resolution [kVAr]	Accuracy
≤ 10A	0.000 – 9.999	0.001	≤(2.0% rdg 7dgt)
≤ 10A	10.00 – 99.99	0.01
10A ≤ FS ≤ 200	0.00 – 99.99	0.01
10A ≤ FS ≤ 200	100.0 – 999.9	0.1
200A ≤ FS ≤ 1000	0.0 – 999.9	0.1
200A ≤ FS ≤ 1000	1000 – 9999	1
1000A ≤ FS ≤3000	0 – 9999	1
Power factor / cosφ (@ 230V, I > 5% FS)
Range	Resolution	Accuracy
0.70c -1.00—0.70i	0.01	±(2.0% rdg 3dgt)
Voltage harmonics (@ 230V in 1Ph systems, 400V in 3Ph systems)
Range [%]	Resolution [%]	Order	Accuracy
0.1 – 100.0	0.1	DC, 01 = 49	±(5.0% rdg 5dgt)
Frequency of fundamental: 42 – 69.0 Hz Harmonics are zeroed at the below conditions: · DC : DC value <0.5% fundamental value or DC value < 1.0V · 1° Harmonic: value of 1° Harmonic < 15V · 2nd – 49th Harmonics: harmonic value <0.5% fundamental value or if value < 1.0V
Current harmonics
Range [%]	Resolution [%]	Order	Accuracy
0.1 – 100.0	0.1	DC, 01 = 49	±(5.0% rdg 5dgt)
Frequency of fundamental: 42 – 69.0 Hz Harmonics are zeroed at the below conditions: · DC : DC value <0.5% fundamental value or DC value < 0.5%FS clamp · 1° Harmonic: value of 1° Harmonic < 0.5%FS clamp · 2nd – 49th Harmonics: harmonic value <0.5% fundamental value or if value < 0.5%FS clamp
Voltage anomalies (Phase-Neutral, Phase-PE)
Range [V]	Resolution [V]	Resolution [ms]	Accuracy [V]	Accuracy [ms]
15.0 – 380	0.2	20ms	±(1.0% rdg 2dgt)	± 1cycle
Voltage anomalies (Phase- Phase)
15.0 – 660	0.2	20ms	±(1.0% rdg 2dgt)	± 1cycle

GENERAL SPECIFICATIONS

DISPLAY AND MEMORY:

Features:

Memory safety section:

Memory PQA section:

Communication:

TFT, touch screen, colour graphic LCD, 320 x 240mm

999 locations, 3 marker levels

8MB (not expanded)

Optical-USB and built-in WiFi

POWER SUPPLY:

Batteries:

Battery life:

Recharging time:

External charger:

Auto Power OFF:

6 x 1.2V(rechargeable) type AA or 6 x 1.5V type AA

> 500 test for each safety functions

> 6 hours in recording

approx. 12 hours

100-240VAC, 50/60Hz / 15VDC, CAT IV 300V

after 5 min of idleness (disabled)

MECHANICAL FEATURES:

Dimensions (L x W x H):

Weight (included batteries):

225 x 165 x 75mm

1.2kg

WORKING ENVIRONMENTAL CONDITIONS:

Reference temperature:

Working temperature:

Allowed relative humidity:

Storage temperature:

Storage humidity:

23°C ± 5°C

0° – 40°C

<80%HR

-10 – 60°C

<80%HR

GENERAL REFERENCE STANDARDS:

Safety of measuring instruments:

Product type standard:

EMC :

Technical documentation :

Insulation:

Pollution degree:

Encapsulation :

Measurement category:

Max height of use:

IEC/EN61010-1, IEC/EN61010-031, IEC/EN61010-2-032

IEC/EN61557-1-2-3-4-5-6-7-10

IEC/EN61326-1

IEC/EN61187

double insulation

IP40

CAT IV 300V to ground, CAT III 350V to ground max 600V among inputs

2000m

TEST VERIFIES REFERENCE STANDARDS:

Continuity test with 200mA:

Insulation resistance:

Earth resistance:

Fault loop impedance:

RCD test:

Phase sequence:

Multifunction:

Prospective short circuit current:

Earth resistance on TN systems:

Power quality:

IEC/EN61557-4

IEC/EN61557-2

IEC/EN61557-5

IEC/EN61557-3

IEC/EN61557-6 (only Phase-Neutral-Ground systems)

IEC/EN61557-7

IEC/EN61557-10

EN60909-0

EN61936-1 EN50522

EN50160

This instrument complies with the requirements of the European Low Voltage Directives 2014/35/EU (LVD) and EMC 2014/30/EU

This instrument complies with the requirements of the European 2011/65/EU (RoHS) and with the requirements of the European 2012/19/EU (WEEE)

T60

T60

Description

One instrument for all electrical safety tests and Power Quality analysis

Features

Technical Overview

Reviews

Related products

WIBRETEST

C4031601

HP30D1

PVST46

T180

IV500

HT4004P

HVD13A

KITGSC4

T1300H